(part of my Freepascal for Raspberry Pi category)

• These are no nonsense downloads, hosted directly on my webserver
• You can use tools like wget to download them to your Raspberry Pi
• Packages are clean, built with a clean Raspberry Pi OS and using a clean workstation with up-to-date virus and malware scanners
• I use these builds myself for my own projects
• I try to maintain as close to 100% uptime as possible. However, if you rely on my builds for critical/production usage, please keep a local mirror of the version you currently use just in case you need to download it again and my webserver is temporarily unavailable.
• I am not liable for any damages / issues / etc

• Compatible with: Raspberry Pi Zero, 1, 2, 3 (generates ARMv6 hardfloat executables)
• Officially released for other platforms
• No GDB support in the IDE
• Installer package download: fpc-3.0.4.arm-linux.tar
• Source code (svn export) download: fpc-3.0.4.svn-export.tar.gz
• Changelog: http://wiki.freepascal.org/User_Changes_3.0.4
• Special notes: None

None yet.

• Compatible with: Raspberry Pi Zero, 1, 2, 3 (generates ARMv6 hardfloat executables)
• No GDB support in the IDE
• Installer package download: fpc-3.0.4rc1.arm-linux.tar
• Source code (svn export) download: fpc-3.0.4rc1.svn-export.tar.gz
• Changelog: http://wiki.freepascal.org/User_Changes_3.0.4
• Special notes: None

• Compatible with: Raspberry Pi Zero, 1, 2, 3 (generates ARMv6 hardfloat executables)
• Officially released for other platforms
• No GDB support in the IDE
• Installer package download: fpc-3.0.2.arm-linux.tar
• Source code (svn export) download: fpc-3.0.2.svn-export.tar.gz
• Changelog: http://wiki.freepascal.org/User_Changes_3.0.2
• Special notes: “Lone zero blocks” errors when unpacking, but works fine.

• The source code package is provided if you want to compile the compiler yourself.
• Source code for building the compiler was obtained by running:

svn export https://svn.freepascal.org/svn/fpcbuild/tags/release_x_x_x/ fpcbuild
cd fpcbuild
wget ftp://ftp.freepascal.org/pub/fpc/dist/x.x.x/docs/doc-pdf.tar.gz

• Any changes required to the source code for a release are documented somewhere on my build page, otherwise no changes are required.
• If you install the compiler version mentioned next to built with and then download the source code for that build, you should be able to build it if you follow the instructions here for the relevant version.

If this helped you out, I'm happy it did. That's enough satisfaction for me. However if you'd like to donate towards my projects, website hosting fees and continuing this work, please see my donations page for instructions. Thank you.